Great Deal Denon AVR-2307CI - AV receiver - 7.1 channel



Rating : 3.0/5.0
Availability : N/A

Best Deal @ Amazon Order Now !



Denon AVR-2307CI - AV receiver - 7.1 channel Features

  • Dolby Digital Surround EX decoding, including Dolby Pro Logic IIx Cinema, Game and Music modes
  • dts decoding - including dts 96/24 5.1 for DVD-Video, dts ES Discrete 6.1, ES Matrix 6.1, and Neo - 6 Cinema & Music modes
  • 7 channels equal power amplifier section with 100 watts per channel (8 ohms, 20 - 20kHz, <0.05% THD)
  • 2 Source/Zone Audio and Video
  • 1080p compatible HDMI switching (2 in/1 out) / Analog video to HDMI output conversion / Video conversion to Component



Denon AVR-2307CI - AV receiver - 7.1 channel Overviews

The AVR-2307CI has been designed with technical improvements to bring it to CI status, making it the choice of installers for applications in the mid priced HD home theater environment. HDMI 1080p digital video circuits have been added to accommodate HD digital video sources such as cable and satellite set top boxes. Video up conversion to HDMI as also been added so that Composite, S-Video and Component sources can be sent out the same HDMI connection to the HD monitor for ease of use. Add to that auto calibration, 7 DSP surround modes, and a litany of adjustments, and you will find this receiver to deliver top performance in the current fast paced Hi Tech home theater world.






Customer Review

Best Customer Review :
I feel I have gathered enough experience on the Denon AVR-2307CI in the past 5 weeks to be comfortable to share my opinions with others.

Prior to purchasing the 2307CI I did my homework and found the two major complaints against the 2307CI are
1) the layout of the remote control, and
2) the receiver's on-screen menu is only visible in 480i mode.

Neither deters me from making the purchase because 1) I use a JP1 compliant universal programmable remote control for my home theater to replace all the remote controls that came with each component; there is no way I will be able to live with the cluster of 6 remotes :)

As for 2) I don't find myself venturing into the receiver's setup menu often once it's set up properly. On the rare occasion I need to do that after the initial setup, I can always switch to a component/device that's not connected such as phono; and the video output automatically switches to 480i. There are 9 inputs on the 2307CI so I don't foresee running out of unused inputs in the near future for my setup. Keep in mind this 480i restriction only applies to the 2307's own on-screen menu, other components' menu will show independent of the resolution.

Video:
Currently I have two DVD players, a DVR, a VCR, an external video processor, and a laser disc player connected to the 2307CI, and the 2307CI's HDMI output goes to the Toshiba 62" HDTV. They all work perfectly. The devices with analog component video outputs get converted to HDMI with zero problem. The quality of the converted video is the same as the cable analog channels. There is some video delay as mentioned by the other reviewer, but in my case it's only two seconds instead of minutes, more than acceptable to me. As a matter of fact, I chose Denon over comparable Onkyo A/V receivers for exactly this reason: more reliable HDMI implementations.

Audio:
As mentioned by many other reviewers, the sound quality is very good for home theater systems. Now don't try to compare the 2307CI to true audiophile components, that's just not fair. My mono-block amplifier for a single channel alone costs more than the 2307CI. But for watching movies and broadcast programs the 2307CI renders high quality sounds.

Installation and User Manual:
I found the installation to be relatively straight-forward. Yes, it would probably take more than a couple of hours to set it up, especially if you have more than a couple of components in your system. But the procedure is very straight-forward. Though I must admit this is not my first home theater system; to the uninitiated the installation may seem more complicated. Though I still don't quite understand the reason for the other reviewer having to connect the DVD recorder directly to the TV. I have only one HDMI cable going from the 2307CI to my HDTV; all the other components/devices are connected to/through the 2307 so the great mass of cables stay where they belong - behind the cabinet and invisible.

It's obvious at least parts of the user manual were translated from Japanese and it's not the best translation possible. Yet I still find the user manual sufficiently informative. One must keep in mind that this is a sophisticated piece of equipment that performs multiple functions; it's very difficult to cover all possible scenarios without knowing exactly what other equipment and in what combination they are used with the 2307.

Pros:
In a nutshell, I find the 2307 an excellent A/V receiver in its price range.
Cons:
Installation could require some work if this is your first time setting up a home theater system. And the layout of the remote can use some improvement.

Customer Review 1 : Great system, remote is a horror - J. Jensen - Boonton, NJ USA
This system is an excellent system for the price. I have everything hooked into it. 42" plasma tv, souround sound speeker system, ps3, vcr/dvd player, directtv hd dvr, sirius unit, and even a turntable for records (remember them?). The only problem with this unit is the remote. You need to be a rocket scientist to understand it. To solve this problem get yourself a logitech universal remote. I have the harmony 880. Now everything works great.


Customer Review 2 : Only last 10 hours and dead - Steve Wang - Canada
I bought one in July, played about 4-5 movies, and it's DEAD, I opened the metal top enclosure as I wonder maybe the fuse was burned, well, I can't believe what I saw, the 2 AC input receptacle housing metal contacts were loosen from the PCBA, it seems to me a defect of "cold solder", the other AC bypass housing was came off the PCB as well, no wonder when I set it up, the AC outlet on the back has never been worked!

Terrible quality assurance, this cold solder should never pass the "vibration test".



0 comments